Pressure Vessels

In addition to providing rotating equipment packages and auxiliary systems, Cobey has become a one-stop shop for all of your pressure vessel needs.

Cobey is qualified to manufacture to the following codes, specifications and standards:

  • ASME – NB
  • ASME – Section VIII, Div. 1 U
  • ASME – Section VIII, Div. 2 U2

Below is a list of pressure vessel products offered by Cobey.

Lube Oil Rundown Tanks

A typical API-614 (ISO-10438) lube oil system requires a rundown tank to provide gravity-fed oil during emergency shutdown of the rotating equipment. Cobey designs and fabricates both pressurized (ASME code) and non-pressurized versions as required by customer preference. Vessel design and instrumentation are in accordance with API-614 (ISO-10438) requirements per figures B.15 or B.16.

Seal-Oil Overhead Tanks

A typical API-614 (ISO-10438) seal oil system will require a seal-oil overhead tank to provide pressurized oil during emergency shutdown of the rotating equipment. Cobey designs and fabricates seal-oil overhead tanks. Vessel design and instrumentation are in accordance with API-614 (ISO-10438) requirements per figures B.17.

Pulsation Dampeners

An integral requirement of reciprocating compressor packages, both API and non-API, Cobey designs and fabricates pulsation dampeners, including performing code calculations and pulsation studies. Units can include baffles, choke tubes, etc as well as built in drain pots and/or liquid separators.

Separators, Knockout Drums and Demisters

Cobey provides complete design and fabrication of pressure vessels used in gas-liquid separation. Cobey has the expertise to ensure that your gas stream is clean, dry and ready for use. Simply provide the gas data and allow us to do the rest.
 

We use COMPRESS ASME VIII pressure vessel software.

 


Cobey Inc designs and manufactures modular piping packages and auxiliary equipment for the petrochemical, energy, oil and gas, and air separation industries.  Engineered products such as lube oil consoles, dry gas seal panels, rundown tanks, and rotating equipment packages are custom designed in accordance with customer specifications and applicable ISO/API standards.
 

Associated Codes & Standards
API 614 ISO 10438
API 618 ISO 13707
ASME U Div. 1
ASME U2 Div. 2
Pressure Vessels Pressure Vessels Pressure Vessels Pressure Vessels Pressure Vessels Pressure Vessels Pressure Vessels Pressure Vessels

<< Previous Stop Play > Next >>